Electric loader 24e

Technical data

Standard equipment electric loader 24e

Electric motor drive: 21 kW; electric motor working hydraulics: 9,7 kW
Low version front carriage for best lifting force
Electric four wheel drive with cardan shaft
Li-Ion battery pack, 260 V / 15.65 kWh (31.3 kWh on option)
On-board charger with Type 2 connector enables charging at a 230V power outlet (3 kW) or a wallbox (11 kW)
Charging cable type 2 / CEE 16 A, 4 m
Battery management system
Energy recuperation
Hill-Hold funktion: ?start up assistant? to make hill starts easier
Tyres 10.0/75-15.3 MPT, offset +40
20 km/h

Eco mode to extend the operating time
Genuine Schäffer axle, 6 hole
Water cooling of electric motors
Multiple disk brake, maintenance free; service and parking brake
Maintenance free articulated pendulum joint
Restraining system for protection roof
LED working headlights on protection roof version: 1 x on the boom; cabin version: 2 x front, 1 x rear
LED lighting system without ABE (General approval certificate) according to ordinance StVZO
Acoustic reverse warning signal (can be switched off)
Parallel lift
Electronically operated additional controller

SilencePlus gear pump, especially quiet
Working hydraulics: 42 l/min
Adjustable steering column
Hour meter and charging status display
Counter weight 100 kg mounted under rear chassis
Rear weight end plate
Main battery switch
Tool Box
Driver-on-board switch
Quick-change frame SWH with hydraulic tool lock

You are currently viewing a placeholder content from Default. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

Unblock content

More Information

Electric loader 24e

Find out more! Sit back and watch our product video.

Technical data electric loader 24e

Engine
- Output: 21 kW
- Working hydraulics: 9,7 kW
Tyres
- Standard tyres: 10.0/75-15.3 MPT, ET+40
- Option I: 27x10.5-15 SKD, ET+40
- Option II: 31x15.5-15 SKD, ET-37
Electric system
- Operating voltage: 12 V
Sounds and vibration
- Sound pressure level LpA: 64 db(A)
- Sound power level guaranteed LwA: 99 db(A)
- Sound power level equivalent LwA: 90 db(A)
- Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
- Total body vibration acc. to ISO 8041: <0,5 m/s²

Drive
- Traction hydraulics: 4-wheel-drive, fully electric
- Axles: Original Schäffer axles, 6 wheel nut rim
- Speed: 0 - 20 kph
Brakes and steering
- Service braking system: Combined brake hydrostatic and multi-disc brake
- Parking brake: Multi-disc brake running in oil bath
- Steering: Fully hydraulic articulated/swivel steering
Tank capacity
- Hydraulic oil: 15 l
Dimensions
- (A) Wheelbase: 1,755 mm
- (B) Chassis length: 3,320 mm
- (C) Overall length with standard bucket: 4,045 mm
- (D) Digging depth: 105 mm
- (E) Max. working height: 3,230 mm
- (G) Loading height with pallet forks: 2,360 mm
- (H) Max. dumping height: 1,700 mm
- (I) Front end height: 1,490 mm
- (J) Dumping width: 260 mm
- (K) Seat height: 1,160 mm
- (L) Protective roof height: 2,190 mm
- (L) Cab height: 2,140 mm
- (M) Max. bucket pivot point: 2,500 mm
- (N) Overall width / option: 1,020 (1,200 turned) - 1,030 - 1,570 mm
- (O) Inner turning radius: 1,310 mm
- (P) Outer turning radius: 2,330 mm
- (Q) Outer radius with standard bucket: 2,710 mm

Working hydraulics
- Delivery rate: 42 l/min
- Operat. pressure: 180 bar
Weights
- Operating weight protective roof incl. Original tyres, driver and standard bucket: 2,290 kg
- Operating weight cabin incl. Original tyres, driver and standard bucket: 2,355 kg
- Lifting capacity: 1,900 kg
- Tipping load, straight, pallet fork acc. to ISO 8313: 1,610 - 1,749 kg
- Tipping load, straight, bucket acc. to ISO 8313: 1,690 - 1,935 kg
- Tipping load, articulated, pallet fork acc. to ISO 8313: 1,140 kg
- Tipping load, articulated, bucket acc. to ISO 8313: 1,470 kg
- Payload, pallet fork, even ground acc. to EN 474-3: 912 kg
- Payload, pallet fork, uneven ground acc. to EN 474-3: 684 kg
- Payload bucket acc. to EN 14397-1: 735 kg
Transport of materials
- Specific material weight: 1,6 t/m³
- Bucket volume acc. to ISO 8041: 0,45 m³
- Recommended bucket width: 1,3 m

Dimensions

Notice

All specifications are subject to change. Optional equipment and tyre dimensions may vary operating weight and tipping loads. The Euro type headstock and foreign attachments may have a negative impact on tipping load and parallel lift. Images may contain products or equipment components which are not mentioned or cannot be obtained as a standard. Maximum values for tipping loads and payloads can only be reached with additional ballasting.

Tyres electric loader 24e

Dimension	Diameter (mm) / Width (mm)	Rim offset	Loader width (mm)*	Tread	Tread options
10.0/75-15.3	770 / 260	40	1,020 (1,200)	MPT	AS, M159
10.0/75-15.3	770 / 260	-5	1,100	MPT	AS, M159
27x10.50-15	680 / 270	40	1,030 (1,180)	SKD
31x15.5-15	770 / 400	-37	1,290	SKD	AS, Allground
With wide axle
10.0/75-15.3	770 / 260	40	1,280	AS	MPT
10.0/75-15.3	770 / 260	-5	1,370	AS	MPT
31x15.5-15	770 / 400	45	1,390	AS	SKD, Allground
31x15.5-15	770 / 400	0	1,480	AS	SKD, Allground
31x15.5-15	770 / 400	-45	1,570	AS	SKD, Allground
31x13.5-15	800 / 350	-35	1,520	Multi Trac

Additional materials available for download

Brochure 24e Attachments

schaeffer_prospekt_hoflader_mockup_a4_en

Need help? Have you made up your mind? Or got a question on our products?

Find your local dealer or contact us. Simply fill in the contact form or give us a call.

Dealer locator

Continue to contact form